U3-HV
U3-HV
U3-HV
U3-HV
U3-HV
  • Load image into Gallery viewer, U3-HV
  • Load image into Gallery viewer, U3-HV
  • Load image into Gallery viewer, U3-HV
  • Load image into Gallery viewer, U3-HV
  • Load image into Gallery viewer, U3-HV

U3-HV

$269.00
$269.00
Sold out

USB DAQ device with 4 dedicated high-voltage analog inputs, 12 flexible I/O, and 4 dedicated digital I/O. The flexible I/O can be configured as either digital or analog, thus providing up to 16 analog inputs, or up to 16 digital I/O. It also has two 10-bit analog outputs, up to 2 counters, and up to 2 timers.

LV (Low-Voltage) Version:

  • 16 Flexible I/O (Digital Input, Digital Output, or Analog Input)
  • Up to 2 Timers (Pulse Timing, PWM Output, Quadrature Input, ...)
  • Up to 2 Counters (32-Bits Each)
  • 4 Additional Digital I/O
  • Up to 16 12-bit Analog Inputs (0-2.4 V or 0-3.6 V, SE or Diff.)
  • 2 Analog Outputs (10-Bit, 0-5 volts)
  • Supports SPI, I2C, and Asynchronous Serial Protocols (Master Only)
  • Supports Software or Hardware Timed Acquisition
  • Maximum Input Stream Rate of 2.5-50 kHz (Depending on Resolution)
  • Capable of Command/Response Times Less Than 1 Millisecond
  • Built-In Screw Terminals for Some Signals
  • OEM Version Available
  • USB 2.0/1.1 Full Speed Interface
  • Powered by USB Cable
  • Drivers Available for Windows, Linux, Mac and Pocket PC
  • Examples Available for C/C++, VB, LabVIEW, Java, and More
  • Includes USB Cable and Screwdriver
  • Free Firmware Upgrades
  • Money Back Guarantee
  • Enclosure Size Approximately 3" x 4.5" x 1.2" (75mm x 115mm x 30mm)
  • Rated for Industrial Temperature Range (-40 to +85 Degrees C)

HV (High-Voltage) Version:

Same features as the LV version except:

  • First 4 Flexible I/O are Changed to Dedicated HV Analog Inputs.
  • 4 HV Inputs have ±10 Volt or -10/+20 Volt Range.
  • 12 LV Inputs (Flexible I/O) Still Available, for 16 Total Analog Inputs.